Under-Dash Fuse/Relay Box Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

3. Under-Dash Fuse/Relay Box - Remove
1.
Disconnect the front side connectors (A).
2.
Remove the under-dash fuse/relay box (B).
3.
Remove the connectors (C).
4.
Disconnect the back side connectors (D).
5.
Carefully remove the relays by prying under the base of the relay.
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall, not start, or cause other functions to fail.

4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.