Park the vehicle on level ground, and start the engine. Hold the engine speed at 3,000 rpm with no load (M/T in neutral, CVT in P or N) until the cooling fan comes on, then turn off the engine, and wait more than 3 minutes.
2.
Remove the dipstick, and wipe off the dipstick, then reinstall the dipstick.
3.
Remove the dipstick, and check the engine oil level. It should be between the upper mark (A) and the lower mark (B).
4.
If the engine oil level is near or below the lower mark check for oil leaks, and add the engine oil to bring it to the upper mark.
